QT4-35 Thailand Table Vibrator Brick Machine Stationary Block Making Machine
The 4-35 brick making machine uses the vertical vibration of the shaking table and the co vibration of the mould pressing, adopts the shaking type independent cloth distribution, adopts the spring isolation for the whole machine's suspension and connection parts, and adopts the double crank linkage mechanism with the function of mechanical balance for the lifting and moving of the lower mold box. It can produce solid brick, hollow brick and paving brick. It needs about 200 square meters of site and 2-4 workers. It can be equipped with a secondary distributor to produce colored paving bricks and wall bricks.
Main Technical Specifications:
Productivity |
2200-2700pcs/day |
Vibration frequency |
2800rpm |
Exciting power |
40kn |
Overall Dimension |
2050×1660×1900(mm) |
Cycle Time |
35 seconds |
Overall weight |
780kg |
Motors Power |
4.8kw |
Pallet size |
850*450mm |
Raw Materials |
crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, expanded perlite, and other industrial wastes. |
Applied Products |
concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc. |
Features:
Based on the former block machine, QT4-35 block machine is the reformed machine with reasonable design, favorable property, and super-strong vibration motor. And it manufactures bricks with good quality, large density, and high strength. This machine adopts top die push and pull and automatic scraper, which is simple to operate as well as the large-scale equipment.
How to Pick a Better Brick machine?
There are not many professional aspects of cement brick machine, and it is not very troublesome for customers to master some small skills. Here we briefly introduce:
1. Looking at the thickness, it can be clearly seen with the naked eye that the thickness of the steel plate is directly related to the service life of the equipment, and some of our customers carry a ruler with them for measurement.
2. Look at the structure inside the unassembled equipment, the thickness of the rotor shaft, hammer head and lining plate, because these accessories are all inside the machine, and the quality can be seen only by looking at the unassembled equipment.
3. Looking at the details, this is more general. You can look at welding, painting, and so on. You can observe it as long as the customer has a heart.
4. The most important thing is to look at the test machine. Customers should not go to the prototype to test the machine, because the prototype must be adjusted comfortably. If you want to test the machine, try the newly produced equipment, so that you can see whether the quality is good or bad.
If you buy equipment, you have to choose it carefully, so that you can be foolproof.